Technical Parameters
DY-TMAL-II(A/B) road marking machine is truck mounted airless cold paint road marking machine. The machine should be installed in the corresponding position of the truck with the related spraying equipment.
Total Exported Case
| Main Parameter |
DY-TMAL-IIA |
DY-TMAL-IIB |
| Engine |
Kohler 18HP or Honda 18HP gasoline engine |
| Air compressor |
0.6 m3/min |
| Paint tank capacity |
110 L |
| Glass beads bin |
110 L double sylinder dispensing |
110 L capacity double sylinder spraying |
| Paint pump |
Maximum pressure:20Mpa; Maximum flow:20L/min |
| Double pump |
Double pump |
| Control system |
Digital intelligent control system |
| Spray gun |
Double pneumatic spray guns, one manual spray gun |
| Applied paint |
Cold solvent paint, water-based paint, and two-component paint (optional) |
| Spraying width |
50-500mm (adjustable) |
| Dimensions (L*W*H) |
1130mm×1290mm×1410mm |
1130mm×1290mm×1410mm |
| Weight |
650kg |
735kg |
| Optional system |
Cleaning system, pre-marking system |
Cleaning system, pre-marking system, 18HP engine
and yellow, white double color paint system |
Product Feature
DY-TMAL-IIA/IIB road marking machine are truck mounted airless cold paint road marking machine. The machine should be installed in the truck, and related equipment such as spraying gun bracket, guide rod, encoder are also need to install in the corresponding position on the truck. Relying on the driving power of the truck, this machine could conduct the road line marking work. When there is no road marking work, this equipment together with all relevant equipment can be removed, not affecting the normal use of vehicles. It is Suitable for main road marking for arterial way , highway and road in city area.
1. Automatic hydraulic mixing system can guarantee the even coating composition, effectively improve the coating performance and service life of the road line.
2. High running speed, suitable for highway and city area road marking work.
3. Double vertical external plunger paint pump with good abrasion resistance and easy maintenance.
4. It can simultaneously operate three or four guns to mark single-color or double-colored lines.
5. Micro-electronic control system (PLC) can be freely programmed to automatically set line types to make the marking operation fast and convenient.
6. New-type spraying gun, equipped with hard side columnar reverse washed nozzle, which can make the on-spot discharge fast and convenient. The non-arc nozzle ensures the marking line straight and exact.
7. The pre-marking system is synchronous with the spraying work, which greatly improves the construction efficiency.
8. Double paint tanks with hydraulic automatic stirrer inside.
